| Length (Inside) | 80.30 in (2039.6mm) |
| Width (Inside) | 34.31 in (871.5mm) |
| Depth (Inside) | 22.82 in (579.6mm) |
| Base Depth (Inside) | 16.81 in (427mm) |
| Lid Depth (Inside) | 6.01 in (152.7mm) |
| Length (Outside) | 83.55 in (2122.2mm) |
| Width (Outside) | 37.56 in (954mm) |
| Depth (Outside) | 31.13 in (790.7mm) |
More ATA Cases Cases
AP8034-1606 Roto Mold Case
Stock #: AP8034-1606
Roto-Molded Shipping and Storage Containers from Ameripack offer the ultimate solution to packaging requirements. Ameripack offers the largest assortment of sizes available from any source. Additionally, Ameripack and its suppliers work closely with you the customer to define, develop and provide the perfect solution to your on-going packing and storage requirements. All Roto-Molded Shipping and Storage Containers are produced to the rigorous specifications of the Airline Transportation Association and comply with the ATA 300 Category 1 specification for 100 trip applications.
Roto-Molded shipping and Storage containers can be produced to be airtight and water tight. These containers also conform to the specifications of many Mil-Specifications and Federal standards.
- Rotationally molded containers retain shape and resist stress cracking
- Thicker edges, corners and ribs increase strength while thinner flat surfaces allow for reduced weight of container
- Color blended into the Polyethylene material guarantee consistency and uniformity throughout the container wall
- Range of interiors, removable or molded-in, capable of providing total protection
- Optional PRV Valves, Humidity Indicators, Locking Latches, Hinged or Removable Lid, and Card Holders Available
- Available Colors: Black, Blue, Grey, Red, Yellow, Olive Drab, Neutral
- Case Shown with Optional Bottom Casters and Gas Shocks on Lid (Required for Hinged Lid Application)
AP8034-1606 Roto Mold Case
Stock #: AP8034-1606
Roto-Molded Shipping and Storage Containers from Ameripack offer the ultimate solution to packaging requirements. Ameripack offers the largest assortment of sizes available from any source. Additionally, Ameripack and its suppliers work closely with you the customer to define, develop and provide the perfect solution to your on-going packing and storage requirements. All Roto-Molded Shipping and Storage Containers are produced to the rigorous specifications of the Airline Transportation Association and comply with the ATA 300 Category 1 specification for 100 trip applications.
Roto-Molded shipping and Storage containers can be produced to be airtight and water tight. These containers also conform to the specifications of many Mil-Specifications and Federal standards.
- Rotationally molded containers retain shape and resist stress cracking
- Thicker edges, corners and ribs increase strength while thinner flat surfaces allow for reduced weight of container
- Color blended into the Polyethylene material guarantee consistency and uniformity throughout the container wall
- Range of interiors, removable or molded-in, capable of providing total protection
- Optional PRV Valves, Humidity Indicators, Locking Latches, Hinged or Removable Lid, and Card Holders Available
- Available Colors: Black, Blue, Grey, Red, Yellow, Olive Drab, Neutral
- Case Shown with Optional Bottom Casters and Gas Shocks on Lid (Required for Hinged Lid Application)
Accessories
Custom Colors Available with Minimum Order
AP8034-1606 Roto Mold Case
Stock #: AP8034-1606
Warranty: This case is covered by a lifetime warranty. If you ever experience any problems with this case, please contact Ameripack and we will have the case repaired or replaced for you.
AP8034-1606 Roto Mold Case
Stock #: AP8034-1606
| Prints | Download |
| Length (Inside) | 80.30 in (2039.6mm) |
| Width (Inside) | 34.31 in (871.5mm) |
| Depth (Inside) | 22.82 in (579.6mm) |
| Base Depth (Inside) | 16.81 in (427mm) |
| Lid Depth (Inside) | 6.01 in (152.7mm) |
| Length (Outside) | 83.55 in (2122.2mm) |
| Width (Outside) | 37.56 in (954mm) |
| Depth (Outside) | 31.13 in (790.7mm) |