| Length (Inside) | 0.00 in (0mm) |
| Width (Inside) | 0.00 in (0mm) |
| Depth (Inside) | 0.00 in (0mm) |
| Base Depth (Inside) | 0.00 in (0mm) |
| Lid Depth (Inside) | 0.00 in (0mm) |
| Length (Outside) | 0.00 in (0mm) |
| Width (Outside) | 0.00 in (0mm) |
| Depth (Outside) | 0.00 in (0mm) |
More LCD/Plasma Screen Cases Cases
FL-16 Flat Screen Lift Case
Stock #: APFC-0002
The affordable alternative to more expensive, heavier pneumatic and electric lifts.
The FL-16 is not only less expensive, but about 25% lighter than other lift cases. This case, when in display mode, will provide you with a display height of 50" -56", depending on your monitor specs.
- 0.50" Heavy Duty Plywood Construction
- "C/F" Style Top Removable Lid/Split Case Design
- 3.5" Heavy Duty Locking Casters
- Recessed Hardware
- Case will Handle Up To a 50" Monitor
- Available in Black, Grey, Red, Green, Blue, Orange, Burgandy, White, Yellow, and Brown
FL-16 Flat Screen Lift Case
Stock #: APFC-0002
The affordable alternative to more expensive, heavier pneumatic and electric lifts.
The FL-16 is not only less expensive, but about 25% lighter than other lift cases. This case, when in display mode, will provide you with a display height of 50" -56", depending on your monitor specs.
- 0.50" Heavy Duty Plywood Construction
- "C/F" Style Top Removable Lid/Split Case Design
- 3.5" Heavy Duty Locking Casters
- Recessed Hardware
- Case will Handle Up To a 50" Monitor
- Available in Black, Grey, Red, Green, Blue, Orange, Burgandy, White, Yellow, and Brown
Accessories
Custom Colors Available with Minimum Order
Ameripack is your one stop shop for all your case needs. No order is too large or too small for us and we can handle any case customization that you can imagine!
FL-16 Flat Screen Lift Case
Stock #: APFC-0002
Warranty: This case is guaranteed to be free of manufacturer's defects. Ameripack will repair or replace this case for you if it is found to be defective.