|
|
|
Rack mounted cases from Ameripack carry over our expertise in protecting sensitive military and photographic equipment over to servers and other technology you want rackmounted.
US Rack Series rack mounted cases feature shells and lids with roto-molding, heavy duty twist latches recessed for safety and durability, handles molded into the casing and rubber feet with shock absorption. Solid stacking is provided in the Roto-X patterning. These cases feature a unique molded-in valance and steel threaded rails with self tapping screws. All of these features combine to make the US Rack Series rack mounted cases remarkably convenient and durable.
19 inch stacking rack mounted cases are available from 4 space units to 12 space units. Rail kits are available - 17 inch rail depth with 2 inch lid depths.
|
|
US Shock Racks 20" deep rack frame rack mounted cases from Ameripack are fitted into a roto-molded tough shell, as you would expect. The integrally molded valance eliminates any need for an external metal valance. Also included in these remarkably durable rack mounted cases are
- a rubber gasket on both the front and rear doors for water resistant protection
- ergonomic handles
- recessed, heavy-duty twist latches
All of this allows these cases to meet most specifications for ATA cases and military cases.
New elastomeric shock technology has replaced the metal coil system to provide an increased level of protection. Field-replacing the standard shocks with other available elastomeric shocks can easily accommodate multiple weight bearing requirements. The US Shock Rack series has the recognizable Roto X pattern and are stackable within the series. Perfect for military rack mounted case applications. Sizes range from 4-space to 16-space.
|
|
|
Roll-X Racks promise and deliver on increased strength and durability thanks to thicker edges, corners and ribs. To balance this and reduce weight, these also feature thinner flat surfaces. Roll-X cases have a depth of 17 3/4" and accommodate 19" rack mountable equipment with 3, 4, 5 and 6 rack space models. These cases are manufactured of polyethylene rotationally molded plastic with 2.5" wheels and industrial pull handle. Roll-X racks interlock and stack with each other. Sizes range from 2U space to 12U space.
|
|
|
19" Stackable Standard Racks are less than half the weight of previous-generation wooden racks thanks to their ultra high molecular weight polyethylene construction that also provides maximum protection. Your sensitive and vulnerable equipment is protected from moisture, dirt and other harm, by the front and rear gasket-sealed removable lids.
|
|
|
Shallow Roto Racks are available as 2, 3 and 4 space X-racks, 10 1/2" deep. These rack mounted cases can accommodate a much wider variety of components. Some examples of components and equipment suitable for these rack mounts are: effect processors (Line 6, Digitech, etc.), signal processors (DBX Comp, Rack Rider eq), power conditioners (Furman, Samson), bass amps (SWR, Galien, Krueger), line mixers, wireless microphone systems (Shure, Sony), CD and cassette players, to name a few, without unplugging them to close the back panel.
|
|
|
Other Military Cases
All Military Cases (includes 13414)
View only Military Standard Roto Mold Cases
View only Military Injection Molded Cases
|
|
|
